RO water purifier problems,ro service center

In this article, we will discuss common RO water purifier problems and their solutions. Along with that, we will also provide information on the effective maintenance of your RO system. For any queries regarding RO troubleshooting, installation, maintenance, or repair contact the RO service center at +91-80060-35444.

Common RO water purifier problems & RO troubleshooting

Here are some common RO water purifier problems that require repair. You can proceed with RO troubleshooting yourself if the problem is a simple one. However, you must get a technician to work on those RO water purifier problems that require expertise and skill.

  1. RO is leaking
    This is one of the most common RO water purifier problems that users face. The major reason for a leaking RO is a loose connection, damaged connection, or filter damage.
    If it is a loose connection then you can tighten the connection. However, if the leaking is being caused by some damage, then you must get it repaired by a technician.
    You can get your repair done at RO service near me by getting in touch at +91-80060-35444
    Our professional will thoroughly check your RO and discover the cause of the leakage and conduct RO troubleshooting.
  2. Water tastes or smells bad
    This is also one of the common RO water purifier problems that people face. If you notice that your RO water has been tasting or smelling bad, then the water in the RO could be stagnant or the membrane or the filter might have been depleted.
    Flushing the entire system twice or thrice will have clean up the stagnant water. If, however, that doesn’t work, then you will have to replace the filter or membrane.
    It is recommended that you get a technician for RO troubleshooting and repair.
  3. The valve is not working properly
    When the valve is not working properly, there is a continuous flow of water. This could either be due to a broken valve or wrong installation of the membrane. In this case, get RO troubleshooting done by an experienced technician.
  4. Noisy faucet
    Noisy faucet is one of the common RO water purifier problems faced by people.
    There are various reasons that could lead to a noisy faucet.
    It could either be caused after installing a new system or after replacing a filter. If that’s the case, then you do not have to worry about it as it will subside over time.
    This could also be caused due to restriction in drain saddle or tubing. In that case, unblocking it will help solve the issue.
    Another common reason for the noisy faucet is a bent tube. If you have a bent tube, straighten all the water lines.
    The noisy faucet could also be caused by air gaps. In that case, check all the connections and tighten any loose connection.
    If you aren’t sure about the reason that is causing noisy faucet, then, contact our RO service center at +91-80060-35444 instant RO troubleshooting.

Slow/no water flow Call Ro Service Center +91-80060-35444

There are many reasons that could cause a slow water flow.It could either be due to a low volume of water or low/high pressure. Measuring the pressure and increasing or releasing it should solve this.
Slow water flow could also be caused due to damaged air bladders, clogged filters, closed water valves, improperly adjusted RO membranes, bent tubing, or other damages.
It is recommended that you get this checked for RO troubleshooting by an expert technician.

  1. Vibrations in RO water purifier
    Vibrations in the RO filter are normally caused after recent filter changes. These vibrations occur due to a difference in pressure between different filters and normally fade around 2-3 days.
  2. RO water purifier is not working
    If your RO water purifier is not working at all and your LED lights don’t turn on after turning the power supply on, then the problem probably lies is the power supply cable or PCB.
    It is advisable to get a technician to do RO troubleshooting for this issue.
  3. RO system keeps draining
    When the RO system keeps draining, the drain line will keep running. There could be various reasons for this RO water purifier problem.
    The storage tank pressure could be low and hence, causing this problem. Measure the storage tank pressure and repressurize.
    The problem could also be caused by damaged tank air bladder, broken valves, worn-out reverse osmosis, or worn-out flow restrictor. In case of either of these issues, you must get the respective parts replaced as soon as possible.
    Contact the RO service center a t+91-80060-35444 to diagnose and conduct RO troubleshooting for these types of RO water purifier problems.
  4. RO storage tank does not fill up
    There could be many reasons for this RO water purifier problem.
    Your storage tank pressure could be high in which case you should measure and repressurize it.
    The problem could also be caused by a closed feedwater valve or water storage tank valve. If that’s the case, then open the valves.
    The feed water pressure could be below 40 psi and could be causing the issue. Increase the pressure.
    Clogged filters, bent tubing, worn-out reverse osmosis could also cause this RO water purifier problems.
    For effectively diagnosing the cause of this RO water purifier problems and repairing, contact the RO service center at +91-80060-35444
  5. Leaking filter or membrane housing
    This could be caused by misplaced or worn-out O-ring. If it has been misplaced, reposition it and if it has been worn out, change it.
    This could also be caused by loose or damaged housing cap. You can reposition the housing cap if it is loose and repair it if it is damaged.
    For reliable repair and RO troubleshooting, contact RO service near me at +91-80060-35444
  6. Water is cloudy
    Cloudy water is mostly caused after installing new filters due to trapped air. This is a common RO water purifier problems that users face after installing new filters. The problem subsides after some time.
    If you notice cloudy water even after 5-10 days, then you may have to get it checked by a technician.
  7. Water doesn’t go down the drain
    The problem could either be caused by a clogged flow restrictor or a clogged drain line.
    If the flow restrictor is clogged, you can clean it or get it replaced. If the drain line is clogged, then you need to unclog it.
    You can get in touch with a reliable RO service near me at +91-80060-35444 for assistance with these RO water purifier problems.

For any assistance or consultation on RO water purifiers, repairing RO water purifier problems, and other queries contact our RO service center at +91-80060-35444

-Published: 20/07/2020
By: RO-Service-Center

 

Leave a Reply

Your email address will not be published. Required fields are marked *